[1]张大伟,王丽,滕继慧,等.扭摆法测转动惯量摆长最佳值的探究[J].延边大学学报(自然科学版),2017,43(02):125-127.
ZHANG Dawei,WANG Li,TENG Jihui,et al.The exploration of rotational inertia for optimal length by torsion pendulum method[J].Journal of Yanbian University,2017,43(02):125-127.
点击复制
ZHANG Dawei,WANG Li,TENG Jihui,et al.The exploration of rotational inertia for optimal length by torsion pendulum method[J].Journal of Yanbian University,2017,43(02):125-127.
扭摆法测转动惯量摆长最佳值的探究
《延边大学学报(自然科学版)》[ISSN:1004-4353/CN:22-1191/N]
卷:
第43卷
期数:
2017年02期
页码:
125-127
栏目:
基础科学研究
出版日期:
2017-07-20
- Title:
- The exploration of rotational inertia for optimal length by torsion pendulum method
- 分类号:
- O313.3
- 文献标志码:
- A
- 摘要:
- 通过改变摆线的长度来分析摆线变化对于刚体转动惯量不确定度的影响,得出扭摆法实验中刚体转动惯量J0以及不确定度随摆长变化的特性.利用与摆长有关的扭转模量K的计算方法,通过改变摆长将实验值J’0与计算值J0相对比,总结出摆长变化与转动惯量值之间满足非完全线性关系,最后通过优化摆长确定了该实验中摆长的最佳位置.本文的研究结果对优化实验条件具有一定的指导意义.
- Abstract:
- We analyze the influence for uncertainty by changing the variation length of rotational inertia, and obtain the characteristic of rotational inertia J0 and uncertainty which are changed by variation length of pendulum. The calculation method of rotational modulus K also be considered in this scheme, and we compared the experimental value J’0 with calculated value J0, so we summarize the incomplete linear relationship between the change of length of pendulum and the rotational inertia. Then, we determine the optimal value by optimized thelength of pendulum in finally. The conclusion has a certain significance to optimize the condition of experiment.
参考文献/References:
[1] 孙炳全,赵涛,刘凤智,等.大学物理实验[M].北京:化学工业出版社,2016:54-58.
[2] 丁红伟,魏英智,张琳.关于传统扭摆方法测量刚体转动惯量实验的改进[J].大学物理实验,2010,23(4):53-55.
[3] 池红岩,丁红伟.关于扭摆法测量刚体转动惯量实验的改进[J].物理通报,2011(1):51-52.
[4] 张天洋,王艳辉,曲光伟,等.空气阻力对复摆振动周期的影响[J].物理实验,2008,28(11):42-45.
[5] 邓锂强.刚体转动惯量试验仪实验的误差分析[J].实验室科学,2013,6(4):27-31.
备注/Memo
收稿日期: 2017-03-17
作者简介: 张大伟(1983—),男,讲师,研究方向为量子调控.
更新日期/Last Update:
2017-06-20