KE Guiyan.Optimization of cold stamping forming quality of automobile parts[J].Journal of Yanbian University,2022,(02):174-178.
汽车零件冷冲压成形质量的优化
- Title:
- Optimization of cold stamping forming quality of automobile parts
- 文章编号:
- 1004-4353(2022)02-0174-05
- Keywords:
- cold stamping; parameter optimization; quality control; drawing test
- 分类号:
- TG386
- 文献标志码:
- A
- 摘要:
- 针对汽车零件冷冲压成形过程存在的起皱、开裂等质量问题,以某品牌汽车的后地板横梁为例对其进行了板料形状和冲压工艺参数的优化.首先,根据拉延时板料的流动情况确定板料的形状和设计拉延筋的分布; 其次,通过正交实验确定最优冲压工艺参数组合,并对最优冲压工艺参数组合进行仿真分析和拉延实验.仿真分析和拉延实验表明,零件无起皱现象,开裂现象明显减少,成形充分,最大厚度和最小厚度均符合零件的设计要求.因此,该优化方案能够为汽车零件冲压成形工艺提供参考.
- Abstract:
- Aiming at the quality problems of wrinkling and cracking in the cold stamping forming process of automobile parts, the sheet material shape and stamping process parameters were optimized by taking the rear floor beam of a certain brand of automobile as an example.Firstly, the shape of the sheet is determined according to the flow of the sheet during drawing and the drawbead design is completed; secondly, the optimal combination of stamping process parameters is determined through orthogonal experiments, and the optimal combination of stamping process parameters is simulated. Simulation analysis and drawing experiments show that the part has no cracking, the wrinkling phenomenon is significantly reduced, the forming is sufficient, and the maximum thickness and minimum thickness meet the design requirements of the part.Therefore, the optimization scheme designed in this paper can provide a reference for stamping and forming of automobile parts.
参考文献/References:
[1] 徐柱,何锋,曹占勇,等.某轿车白车身结构强度分析与优化研究[J].现代制造工程,2020(2):82 - 87.
[2] 杨程,王瑞静,牛艳,等.台阶盒形件成形工艺研究[J].塑性工程学报,2020,27(6):1 - 6.
[3] 徐晶晶.基于汽车隔热板冲压工艺的数值模拟[J].成都工业学院学报,2021,24(3):53 - 57.
[4] 余海燕,吴航宇,汪林.先进高强钢板冲压成形后的时效回弹行为[J].塑性工程学报,2021,28(6):2 - 7.
[5] 华林,魏鹏飞,胡志力.高强轻质材料绿色智能成形技术与应用[J].中国机械工程,2020,31(22):2753- 2762.
[6] 王康康,陈泽中,江楠森,等.基于GA - BP的汽车行李箱盖内板冲压成形工艺优化[J].塑性工程学报,2021,28(9):28 - 34.
[7] 于传浩,张毅.基于Dynaform的凸缘圆筒件拉深工艺有限元分析[J].锻压技术,2022,47(2):56 - 61.
[8] 周博文,樊雷,邓深,等.材料性能参数对汽车B柱冲压成形的影响[J].金属热处理,2019,44(5):215- 218.
[9] 佟政阳,程思佳,王虎军,等.不同冲压速度下箍带弯曲成形有限元模拟[J].锻压技术,2022,47(2):94 - 99.
[10] 鲜敏,彭威,于培师,等.T形盒形件拉延冲压工艺优化[J].锻压技术,2019,44(12):20 - 26.
[11] 刘磊,温彤,岳远旺,等.轿车顶盖冲压成形塌陷研究[J].中南大学学报(自然科学版),2015,46(5):1622 - 1627.
备注/Memo
收稿日期: 2022-03-27
基金项目: 福建省教育厅中青年教师教育科研项目(JAT210873)
作者简介: 柯桂颜(1992—),男,硕士,工程师,研究方向为模具CAD/CAE及数控加工技术.