WANG Li,HUANG Zhaoming*,ZHAO Hengwen,et al.Development of progressive die for complex boundary sheet metal parts with multi bend and multi hole features[J].Journal of Yanbian University,2020,46(01):74-78.
多弯曲多形孔复杂边界钣金件级进模的开发
- Title:
- Development of progressive die for complex boundary sheet metal parts with multi bend and multi hole features
- 文章编号:
- 1004-4353(2020)01-0074-05
- Keywords:
- progressive die; complex boundary sheet metal parts; blank layout; real stamping test; finite element model
- 分类号:
- TG385.2
- 文献标志码:
- A
- 摘要:
- 为避免冲压过程中由多弯曲多形孔结构引起的零件外部边界与内部形孔误差而导致的级进模开发失败,应用全工序方法开发出一套特征件级进模.首先设计了一个带有多弯曲多形孔特征的复杂边界钣金件的12工序毛坯排样方案,并对坯料的全工序冲压成形进行了有限元仿真分析.其次以全工序有限元仿真为基础,结合毛坯排样方案设计了一套12工位级进模.最后对试制的模具进行实冲试验,结果显示:产品表面光滑,无起皱与破裂等其他成形性问题,且产品的孔位精度和弯曲后的制件边界误差均满足设计要求; 因此,本文设计的毛坯排样方案及其级进模能够很好地解
- Abstract:
- In order to avoid the failure of progressive die development due to the errors of the outer boundary and inner hole caused by the multi bend and multi hole structure in the stamping process, a set of feature progressive die was developed by using the whole process method. Firstly, a 12 process blank layout scheme of complex boundary sheet metal parts with multi bend and multi hole was designed, and the finite element simulation analysis of the whole process of blank stamping was carried out. Secondly, a set of 12 position progressive die was designed based on the finite element simulation of the whole process combined with the blank layout scheme. At last, through the trial production and real punching test of the die, it is concluded that the surface of the stamping product is smooth and without wrinkle, crack and other formability problem, the hole position accuracy of the product and the boundary error of the bent part can meet the design requirements. The blank layout scheme and progressive die designed in this paper can well solve the stamping problem of the sheet metal parts with complex boundary of multi bend and multi hole.
参考文献/References:
[1] 黄昭明,王利,陈学健,等.发动机油底壳多工位传递模[P].中国:ZL201610096455.7.2017-08-25.
[2] 桂良进,张晓前,周驰,等.各向异性高强钢成形极限曲线有限元预测[J].清华大学学报(自然科学版),2019,59(1):66-72.
[3] 黄昭明,赵恒文,潘金元,等.多工位级进冲压成形联动数值模拟[J].山东理工大学学报(自然科学版)2018,32(4):35-39.
[4] 郭强,郑燕萍,朱伟庆,等.DP-780高强钢车身侧围板成形质量优化[J].塑性工程学报,2019,26(1):40-45.
[5] 郭强,郑燕萍,晋保荣.基于林用消防车DP590高强钢冲压件回弹性能的研究[J].热加工工艺,2018,47(24):64-67+72.
[6] 龚志辉,李琳,周顺峰,等.汽车覆盖件拉延模具精确型面构建方法研究[J].湖南大学学报(自然科学版),2014,41(10):1-6.
[7] 张正修.多工位连续冲压技术及应用[M].北京:机械工业出版社,2010:27.
[8] 涂小文.AutoForm原理技巧与战例实用手册[M].湖北:湖北科学技术出版社,2013:279-302.
[9] 黄昭明,王利,刘小飞,等.基于AutoForm多工位连续冲压成形数值模拟[J].合肥工业大学学报(自然科学版),2015,38(2):157-160.
[10] 罗志敏.轿车前纵梁冲压成形工艺多目标优化及模具技术研究[D].长沙:湖南大学,2012.
[11] 黄昭明,王利,张冬冬,等.车身钣金件级进模快速设计方法[P].中国:ZL201710952613.9.2019-11-12.
备注/Memo
收稿日期: 2020-01-03 *通信作者: 黄昭明(1981—),男,副教授,研究方向为汽车冲压模具先进设计.
基金项目: 宣城职业技术学院校级科研振兴计划项目(ZXTS201801); 马鞍山市工程技术研究中心开放基金资助项目(QMSG202004、QMSG202005); 安徽省高等学校自然科学研究重点项目(KJ2017A896、KJ2019A1140); 安徽省高校学科(专业)拔尖人才学术资助项目(gxbjZD63)