TANG Jiajun,PEI Changchun*.Study on optimum selection of mechanical properties of multi-index RAC based on queuing scoring method and matrix analysis method[J].Journal of Yanbian University,2019,45(03):279-282.
基于排队评分法与矩阵分析法的多指标再生混凝土力学性能的优选研究
- Title:
- Study on optimum selection of mechanical properties of multi-index RAC based on queuing scoring method and matrix analysis method
- 文章编号:
- 1004-4353(2019)03-0279-04
- Keywords:
- RAC; queuing scoring method; matrix analysis method; multi-index
- 分类号:
- TU528
- 文献标志码:
- A
- 摘要:
- 为了研究多指标情况下再生混凝土力学性能的最优组合,以再生骨料替代率、粉煤灰替代率和钢纤维掺入率为因素,抗压强度、劈拉强度、抗折强度、拉压比和折压比为指标,分别利用排队评分法与矩阵分析法对再生混凝土正交试验结果进行分析.结果表明:各因素对再生混凝土力学性能影响的大小顺序依次为钢纤维掺入率、粉煤灰替代率、再生骨料替代率; 再生混凝土力学性能的最优组合为A4B2C4,即再生骨料替代率为100%、粉煤灰替代率为10%、 钢纤维掺入率为1.8%; 矩阵分析法所得结果与正交试验分析结果更为接近,这表明矩阵分析法在确定最佳组合方案时优于排队评分法.
- Abstract:
- In order to study the optimal combination of mechanical properties of recycled aggregate concrete(RAC)under multi-index conditions, the orthogonal test results of RAC were analyzed by queuing scoring method and matrix analysis method, taking the replacement rate of recycled aggregate, fly ash and steel fiber as factors, and the compressive strength, splitting tensile strength, flexural strength, tension-compression ratio and flexural-compression ratio as indicators. The order of the influence of various factors on mechanical properties of RAC is the incorporation rate of steel fiber, the replacement rate of fly ash and the replacement rate of recycled aggregate. The optimal combination of mechanical properties of RAC is A4B2C4, that is, the replacement rate of recycled aggregate is 100%, the replacement rate of fly ash is 10%, and the incorporation rate of steel fiber is 1.8%. The results of matrix analysis method are closer to that of orthogonal experiment, which shows that matrix analysis method is superior to queuing scoring method in determining the best combination scheme.
参考文献/References:
[1] 金宝宏,詹冬.钢纤维再生混凝土强度的试验研究[J].混凝土,2014(3):102-105.
[2] 孙呈凯,金宝宏,李家俊,等.PVA纤维再生混凝土力学性能正交试验研究[J].广西大学学报(自然科学版),2018,43(4):1569-1575.
[3] 张学兵,匡成钢,方志,等.钢纤维粉煤灰再生混凝土强度正交试验研究[J].建筑材料学报,2014,17(4):677-684.
[4] 张子建,范利丹,余永强,等.多指标混凝土正交试验的分析方法研究[J].科技通报,2017,33(11):47-51.
[5] 王玄静.正交试验设计的应用及分析[J].兰州文理学院学报(自然科学版),2016,30(1):17-22.
[6] 伍毅,阮竞兰.矩阵分析法在胶辊砻谷机工作参数优化中的应用[J].河南工业大学学报(自然科学版),2012,33(5):83-88.
[7] 高世龙,安立宝.基于矩阵分析法的CBN刀具干式硬车参数优化研究[J].机床与液压,2016,44(17):63-67.
[8] 杜金萍,王桂梅,高术振.XX-2不锈钢切削参数模糊正交优化[J].河北工程大学学报(自然科学版),2007,24(2):65-68.
[9] 匡成钢.钢纤维粉煤灰再生混凝土力学性能的试验研究[D].湘潭:湘潭大学,2013.
[10] 姚庆鑫,谢建军,刘军霞.多指标正交实验优化BLPAMA选择性吸附树脂的制备[J].化工新型材料,2015,43(5):127-129.
[11] 魏效玲,薛冰军,赵强.基于正交试验设计的多指标优化方法研究[J].河北工程大学学报(自然科学版),2010,27(3):95-99.
备注/Memo
收稿日期: 2019-06-10
*通信作者: 裴长春(1976—),男,博士,讲师,研究方向为混凝土结构理论与应用.