[1]金俊杰,廉哲满*.渐开线圆柱齿轮齿廓的修形研究[J].延边大学学报(自然科学版),2019,45(03):276-278.
JIN Junjie,LIAN Zheman*.Research on profile modification of involute cylindrical gear[J].Journal of Yanbian University,2019,45(03):276-278.
点击复制
JIN Junjie,LIAN Zheman*.Research on profile modification of involute cylindrical gear[J].Journal of Yanbian University,2019,45(03):276-278.
渐开线圆柱齿轮齿廓的修形研究
《延边大学学报(自然科学版)》[ISSN:1004-4353/CN:22-1191/N]
卷:
第45卷
期数:
2019年03期
页码:
276-278
栏目:
应用科学研究
出版日期:
2019-11-20
- Title:
- Research on profile modification of involute cylindrical gear
- 文章编号:
- 1004-4353(2019)03-0276-03
- 分类号:
- TH122
- 文献标志码:
- A
- 摘要:
- 根据坐标变换方法和标准渐开线方程,推导出了一个新的非工作面齿廓修形方程,然后根据该修形方程和SolidWorks建立了齿轮模型.利用有限元分析法对渐开线圆柱齿轮齿廓修形前后的受力情况进行了分析,结果表明修形后的齿轮接触应力比修形前减小了7.01%,修形后的齿根应力比修形前减少了10.95%.
- Abstract:
- According to coordinate transformation method and standard involute equation, we derive a new profile modification equation for non -working face, and then establish a gear model based on the modification equation and SolidWorks. The stress of involute cylindrical gear before and after modification is analyzed by finite element method. The results show that the contact stress of modified gear is 7.01% less than that before modification, and the root stress of modified gear is 10.95% less than that before modification.
参考文献/References:
[1] 李毅华,栾振辉.国内外传动机械学的现状及发展趋势[J].煤矿机械,2005,26(12):8-10.
[2] 莫江涛,钟家宗,龚佳兴.渐开线齿廓修形方法及应用[J].煤矿机械,2018,39(1):117-121.
[3] 陈一东.渐开线圆柱齿轮接触分析和俢形特性[D].长沙:国防科学技术大学,2007.
[4] 吴序堂.齿轮啮合原理[M].2版.西安:西安交通大学出版社,2009.
[5] 孙建国.渐开线圆柱齿轮修形及动力接触特性研究[D].重庆:重庆大学,2008.
[6] 周志峰.渐开线圆柱直齿轮修形的分析与研究[D].北京:北京交通大学,2014.
[7] 周志峰,刘伟,王婧.渐开线直齿轮修形的有限元分析与研究[J].机电工程,2013,30(12):1490-1493.
[8] 汤鱼,常山,何玉龙,等.齿廓修形对齿面接触应力影响的研究[J].通用机械,2010,9(4):7-9.
[9] 周广森.渐开线圆柱齿轮修形设计研究[D].沈阳:东北大学,2010.
[10] 邓小禾.渐开线圆柱齿轮齿廓修形与啮合规律研究[D].武汉:武汉理工大学,2015.
备注/Memo
收稿日期: 2019-01-20
*通信作者: 廉哲满(1964—),男,博士,教授,研究方向为CAD/CAM及计算机仿真.
更新日期/Last Update:
2019-11-20