DU Fengjiao,LIU Jiangang.Design and feasibility analysis of grinding fixture for thin-walled parts[J].Journal of Yanbian University,2019,45(03):268-271.
薄壁套筒类零件磨削夹具的设计及其可靠性分析
- Title:
- Design and feasibility analysis of grinding fixture for thin-walled parts
- 文章编号:
- 1004-4353(2019)03-0268-04
- Keywords:
- fixture; thin-walled mandrel; finite element; reliability
- 分类号:
- TG75
- 文献标志码:
- A
- 摘要:
- 为提高薄壁类零件的加工精度,利用蛇形弹簧受轴向力产生径向膨胀而夹紧零件的原理设计了一套薄壁套筒类零件磨削夹具.对夹具中的螺栓拧紧力矩与蛇形弹簧的轴向力之间的关系进行研究显示,当蛇形弹簧所受轴向力为5 000 N时,螺栓所需拧紧的力矩为309.46 N·m.利用Workbench软件对夹具中螺栓拧紧力矩(309.46 N·m)的工作状态进行有限元分析表明,夹具所使用的材料可满足其性能要求; 蛇形弹簧应力集中处为Φ25轴径处,蛇形弹簧过盈配合处(Φ36内径)胀紧变形为0.007 mm,最大应变为0.000 51,最大应力为101.79 MPa; 蛇形弹簧膨胀接触处为套阀阀芯变形最大处,最大径向变形量为0.002 1 mm、最大应力为25.22 MPa、最大应变为0.000 13.对夹具进行可靠性分析表明,其应力可靠度为100%.
- Abstract:
- In order to improve the machining precision of thin -walled parts, a set of clamping fixture is designed by means of radial expansion of serpentine springs. A thin-walled sleeve-type grinding tool is designed by using the principle that the serpentine spring is radially expanded by the axial force to clamp the part. When the axial force of the serpentine spring is 5 000 N, the tighten torque required for bolts is 309.46 N·m. The finite element analysis of the working state of the bolt tightening moment of 309.46 N·m in the fixture shows that the material used in the fixture can meet its performance requirements. At the stress concentration of the serpentine spring is at the diameter Φ25, the expansion deformation of the serpentine spring in the interference fit(the inner-diameter of Φ36)is 0.007 mm, the maximum strain is 0.000 51, and the maximum stress is 101.79 MPa; The expansion contact of the serpentine spring is the maximum deformation of the valve spool, and the maximum radial deformation of the valve spool is 0.002 1 mm, the maximum stress is 25.22 MPa, and the maximum strain is 0.000 13. The reliability analysis of the fixture shows that the stress reliability is 100%.
参考文献/References:
[1] 马廷辉.普通车磨机床加工薄壁套通用胀套式简易心轴的研究与设计[J].河北农机,2018,12(9):72-83.
[2] 黄华宾.薄壁壳体液压自制工装的设计[J].金属加工(冷加工),2018,12(12):48-50.
[3] 吴拓.机床夹具设计[M].北京:机械出版社,2009:60-61.
[4] 仝西琳,张明魁.薄壁零件的车削加工精度概述[J].机械制造与研究,2006,6(5):66-68.
[5] 陈德兰.控制薄壁零件变形的工艺措施[J].装备制造技术,2010,12(6):119-120.
[6] 王青城.一种薄壁衬套加工及其夹具设计[J].工艺与检测,2011,12(5):97-98.
[7] 李莲芝,杨卓娟,王东明.弹簧胀套有限元分析及其制造工艺[J].吉林工程技术师范学院学报,2009,25(8):70-73.
[8] 李利民.弹性胀套的有限元分析及在检具中的应用[J].大众科技,2012,14(7):160-161.
[9] 温秉全.金属材料手册[M].北京:电子工业出版社,2009:8-81.
[10] 林水福,佘公藩.螺栓拧紧力矩-轴向力关系研究[J].航空标准化与质量,1991,12(6):16-19.
[11] 范凤仙.加工薄壁零件的弹性胀紧夹具[J].制造·材料,1999,434(38):61-62.
[12] 孙靖民.现代设计方法[M].哈尔滨:哈尔滨工业大学出版社,2003:49-51.
[13] 孙恒.机械原理[M].北京:高等教育出版社,2016:58-62.
[14] 芮延年.现代可靠性设计[M].北京:国防工业出版社,2006:4-10.
相似文献/References:
[1]刘建刚,杜风娇.一种液性塑料的薄壁类零件磨削夹具的设计[J].延边大学学报(自然科学版),2020,46(03):265.
LIU Jiangang,DU Fengjiao.Design of grinding fixture for thin wall parts of liquid plastics[J].Journal of Yanbian University,2020,46(03):265.
备注/Memo
收稿日期: 2019-04-19
作者简介: 杜风娇(1987—),女,工程师,研究方向为夹具设计、机械传动.
基金项目: 国家自然科学基金资助项目(51565016); 福建省中青年教师教育科研项目(JAT170588); 武夷学院校级课题(XL201802)