[1]王琪,廉哲满*.基于CATIA二次开发的膜片弹簧建模系统研究[J].延边大学学报(自然科学版),2017,43(04):367-370.
　WANG Qi,LIAN Zheman*.The research of diaphragm spring modeling system based on CATIA secondary development[J].Journal of Yanbian University,2017,43(04):367-370.
点击复制

基于CATIA二次开发的膜片弹簧建模系统研究

《延边大学学报(自然科学版)》[ISSN:1004-4353/CN:22-1191/N] 卷: 第43卷 期数: 2017年04期 页码: 367-370 栏目: 应用科学研究 出版日期: 2017-12-20
Title:
The research of diaphragm spring modeling system based on CATIA secondary development
作者:
王琪;  廉哲满*
延边大学工学院 机械设计及理论专业, 吉林 延吉 133002
Author(s):
WANG Qi;  LIAN Zheman*
Department of Mechanical Design and Theory, College of Engineering, Yanbian University, Yanji 133002, China
关键词:
膜片弹簧;  二次开发;  参数化设计
Keywords:
diaphragm spring;  secondary development;  parametric design
分类号:
TH122
文献标志码:
A
摘要:
提出了一种基于CATIA二次开发的离合器膜片弹簧建模方法.该方法采用VB 6.0作为二次开发工具,首先通过VB编程与CATIA的参数化设计实现VB与CATIA通信,然后在VB中创建交互界面,并根据所选取的参数进行建模.实验结果表明,该建模系统能够实现膜片弹簧模型的建立,且可反复利用.
Abstract:
In this paper, a new method based on CATIA secondary development of clutch diaphragm spring is presented. This method adopts VB 6.0 as a secondary development tool. Firstly, VB programming and CATIA parametric design to realize VB communication with CATIA, and then create interfaces in VB and according to the selected parameters to modeling. The experimental result show that the modeling system can realize the establishment of diaphragm spring model and can be reused.

参考文献/References:

[1] 李运江.机器人概论[M].北京:机械工业出版社,2011:52-75.
[2] 张玫,邱钊鹏,诸刚.机器人技术[M].北京:机械工业出版社,2011:25-41.
[3] 郭彤颖,安东.机器人学及其智能控制[M].北京:人民邮电出版社,2014:38-79.
[4] 陈黄祥.智能机器人[M].北京:化学工业出版社,2012:16-29.
[5] 郭洪江.工业机器人运用技术[M].北京:科学出版社,2008:13-57.
[6] Cho S I, Chang S J, Kim Y Y, et al. Development of a three-degrees-of-freedom robot for harvesting lettuce using machine vision and fuzzy logic control[J]. Bio-systems Engineering, 2012,82(2):143-149.
[7] Birglen L, Gosselin C M. IEEE International Conference on Robotics and Automation[C]//Taipei, Taiwan, 2013:1139-1145.
[8] Birglen L. Kinetostatic analysis of under actuated fingers[J]. IEEE Transaction Robotics Automation, 2014,20(2):211-221.
[9] Reed J N, Miles S J. Automatic mushroom harvester development[J]. Agric Engng Res, 2012,78(1):15-23.

备注/Memo

收稿日期: 2017-11-13*通信作者: 廉哲满(1964—),男,博士,教授,研究方向为CAD/CAM及计算机仿真.

更新日期/Last Update: 2017-12-20