[1]白育全,文学洙*,Lee In Hwan,等.基于直写技术的平面螺旋天线的研究[J].延边大学学报(自然科学版),2014,40(04):357-359.
　BAI Yuquan,WEN Xuezhu*,Lee In Hwan,et al.Fabrication of rectangular planar spiral antenna based on direct writing technology[J].Journal of Yanbian University,2014,40(04):357-359.
点击复制

基于直写技术的平面螺旋天线的研究

《延边大学学报(自然科学版)》[ISSN:1004-4353/CN:22-1191/N] 卷: 第40卷 期数: 2014年04期 页码: 357-359 栏目: 应用科学研究 出版日期: 2014-12-20
Title:
Fabrication of rectangular planar spiral antenna based on direct writing technology
作者:
白育全1; 2;  文学洙1*;  Lee In Hwan2;  Kim Min Kyung2
1.延边大学工学院 机械工程系, 吉林 延吉 133002; 2.韩国忠北大学 机械工程系 Nano & Bio实验室, 忠清北道 清州 361763
Author(s):
BAI Yuquan1; 2;  WEN Xuezhu1*;  Lee In Hwan2;  Kim Min Kyung2
1.Department of Mechanical Engineering, College of Engineering, Yanbian University, Yanji 133002, China; 2.Nano & Bio Systems Laboratory, Department of Mechanical Engineering, Chungbuk National University, Cheongju 361763, Korea
关键词:
RFID;  直写;  平面螺旋天线;  导电性油墨
Keywords:
RFID;  direct writing;  planar spiral antenna;  conductive ink
分类号:
TN41; TN402
文献标志码:
A
摘要:
提出了一种利用直写(direct writing)技术制造具有规定电学性能的平面螺旋天线的方法.首先介绍了实验设备的构成和制造方法,然后在线宽实验的基础上制作了具有一定电感值的平面螺旋天线,并理论计算和实际测量了天线的电感值,结果显示理论计算得到的电感值在实际测量值范围内.将天线与芯片连接后,通过阅读器测试显示天线可以正常工作,说明在实验设备条件下可利用直写技术制作平面螺旋天线.
Abstract:
This paper proposes a method which use direct writing technology manufacture planar spiral antenna have provisions of electrical performance. At first, we introduce the composition of experimental facilities and manufacturing method, and made a required inductance value planar antenna base on line width experiment, then, the inductance is measured and calculated. Results show that the theoretical calculation results is in the range of the actual measured value. After connecting the antenna and the chip, the antenna can work normally by the reader test. Thereby, it is the possibility of manufacture planar spiral antenna by direct writing under the condition of existing experimental equipment.

参考文献/References:

[1] 戴彩艳.13.56 MHz RFID读写器天线的研究与设计[D].福州:福建师范大学,2013.
[2] 刘丽梅,李娟,苏冠群.RFID天线制作应用价值及前景分析[J].金卡工程,2007(12):54-56.
[3] 刘春格.RFID电子标签天线的印刷[J].出版与印刷,2011(1):37-39.
[4] Oh Sung Taek, Lee In Hwan, Cho Hae Yong. Fabrication characteristics of conductive materials for the flow rate and nozzle moving speed[J]. Journal of Industrial Science and Technology Institute, 2013,27(1):1-4.
[5] Mohan S S, Hershenson M, Boyd S P, et al. Simple accurate expressions for planar spiral inductances[J]. IEEE J Solid-State Circuits, 1999,34(10):1419-1424.
[6] Greenhouse H M, Member Senior. Design of planar rectangular microelectronic inductors[J]. IEEE Transaction on Parts, Hybrids, and Packing, 1974,10(2):101-109.
[5] Oh S T, Lee I H, Kim H C, et al. Line width variation according to fabrication conditions and material characteristics[C]. Busan: Proceedings of KSMPE Spring Conference, 2013.

相似文献/References:

[1]王彦,李永珍.一种改进的RFID双向安全认证协议[J].延边大学学报(自然科学版),2014,40(01):58.
　WANG Yan,LI Yongzhen*.An improved RFID mutual authentication protocol[J].Journal of Yanbian University,2014,40(04):58.

备注/Memo

收稿日期: 2014-04-02*通信作者: 文学洙(1963—),男,副教授,研究方向为机构学与机械动力学.

更新日期/Last Update: 2014-12-20