[1]王德超,朴成道,尹凤哲,等.数控铣削参数优化方法的研究[J].延边大学学报(自然科学版),2020,46(04):333-338.
　WANG Dechao,PIAO Chengdao,YIN Fengzhe,et al.Research on optimization method of CNC milling parameters[J].Journal of Yanbian University,2020,46(04):333-338.
点击复制

数控铣削参数优化方法的研究

《延边大学学报(自然科学版)》[ISSN:1004-4353/CN:22-1191/N] 卷: 第46卷 期数: 2020年04期 页码: 333-338 栏目: 基础科学研究 出版日期: 2020-12-20
Title:
Research on optimization method of CNC milling parameters
文章编号:
1004-4353(2020)04-0333-06
作者:
王德超1;  朴成道2;  尹凤哲1;  赵德金2
( 1.延边大学 工程训练中心, 吉林 延吉 133002; 2.延边大学 工学院, 吉林 延吉 133002 )
Author(s):
WANG Dechao1;  PIAO Chengdao2;  YIN Fengzhe1;  ZHAO Dejin2
( 1.Engineering Training Center, Yanbian University, Yanji 133002, China; 2.College of Engineering, Yanbian University, Yanji 133002, China )
关键词:
多目标遗传算法;  切削功率;  表面粗糙度;  铣削参数
Keywords:
multi -objective genetic algorithm;  cutting power;  surface roughness;  milling parameters
分类号:
TH16
文献标志码:
A
摘要:
为了优化数控铣削参数,以切削比能低、表面质量优为优化目标,对45号钢进行了单工步干式铣削沟槽正交实验.采用多目标遗传算法求解出了不同铣削参数的优化解,并通过对比经验参数与优化参数的实验结果得出了最优铣削参数组合.在最优铣削参数组合下对工件进行加工(粗/半精加工)时,其加工切削比能和工件表面粗糙度比优化前分别降低了46.2%和41.6%,因此本文优化方法可为提高数控铣削加工质量和降低能耗提供参考.
Abstract:
In order to optimize the CNC milling parameters, with low cutting specific energy and excellent surface quality as the optimization goals, a single -step dry milling groove orthogonal experiment was carried out on 45 steel. The multi -objective genetic algorithm is used to solve the optimization solutions of different milling parameters, and the optimal milling parameter combination is obtained by comparing the experimental results of the empirical parameters and the optimized parameters. When machining under the optimal combination of milling parameters(rough/semi -finish machining), the specific energy of machining and the surface roughness of the workpiece are reduced by 46.2% and 41.6% respectively compared to before optimization. Therefore, the optimization method in this paper can provide reference for improving the quality of CNC milling and reducing energy consumption.

参考文献/References:

[1] 李聪波,朱岩涛,李丽,等.面向能量效率的数控铣削加工参数多目标优化模型[J].机械工程学报,2016,52(21):120-129.
[2] FRATILA D, CCAIZAR C. Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3[J]. Journal of Cleaner Production, 2011,19(6):640-645.
[3] 谢书童,郭隐彪.边缘分布估计算法在车削参数优化中的应用[J].中国机械工程,2010,21(1):22-26.
[4] CAMPOSECO-NEGRETE C. Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA[J]. Journal of Cleaner Production, 2013,53(16):195-203.
[5] 马峰,张华,曹华军.面向低能耗少切削液的多目标加工参数优化[J].机械工程学报,2017,53(11):157-163.
[6] 李爱平,鲍进,李聪,等.基于低能耗的平面端铣削粗/精加工参数全局多目标优化[J].中国机械工程,2015,26(14):1888-1894.
[7] 邓朝晖,符亚辉,万林林,等.面向绿色高效制造的铣削工艺参数多目标优化[J].中国机械工程,2017,28(19):2365-2372.
[8] 徐敬通.数控机床能耗建模与切削参数节能优化研究[D].大连:大连理工大学,2016.
[9] 胡韶华,何彦,刘飞.高能效高速稳态铣削参数优化[J].沈阳工业大学学报,2017,39(3):286-291.
[10] RAJEMI M F, MATIVENGA P T, ARAMCHAROEN A. Sustainable machining: selection of optimum turning conditions based on minimum energy considerations[J]. Journal of Cleaner Production,2010,18(10/11):1059-1065.
[11] 石文天,王西彬,刘玉德,等.基于响应曲面法的微细铣削表面粗糙度预报模型与实验研究[J].中国机械工程,2009,20(20):2399-2402.
[12] XIE J, LIU F, QIU H. An integrated model for predicting the specific energy consumption of manufacturing processes[J]. International Journal of Advanced Manufacturing Technology, 2016,85(5/6/7/8):1339-1346.
[13] 胡瑞飞,殷鸣,刘雁,等.切削稳定性约束下的铣削参数优化技术研究[J].机械工程学报,2017,53(5):190-198.
[14] 赵丽娟,范佳艺.基于遗传算法的采煤机螺旋滚筒多目标优化设计[J].中国机械工程,2018,29(5):591-596.
[15] 剌朝阳,魏娟,王广通.基于Matlab遗传算法的数控铣床切削参数优化[J].组合机床与自动化加工技术,2016(1):39-41.
[16] 陈宏钧.实用机械加工工艺手册[M].2版.北京:机械工业出版社,2003.

备注/Memo

收稿日期: 2020-05-22 作者简介: 王德超(1991—),男,助理实验师,研究方向为数控技术与智能制造等.
基金项目: 延边大学应用基础项目(602020025); 吉林省高教科研课题(JGJX2020D50); 延边大学2020年度“金课”项目

更新日期/Last Update: 2020-12-20